Shift key to enable gain trim, offset control The pad has a range of 6 to 20 db of loss and is preset to a 10 db loss. This pad is to be placed at the input of the power amp.
In order to do this and not add any amplifier stages an output pad is supplied. This results in the need to trim Avocet’s output gain. Most powered monitors do not have a level control that is meaningful. POWERED MONITORS, POWER AMPS WITH NO GAIN CONTROL The D/A convertor uses the latest technology intergated circuits. The headphone audio path is done with high quality integrated circuits. Yes they make acoustic clicks when operating. All switching and gain control functions in the main audio path is done with relays. The main audio path is discrete class A electronics with a stepped attenuator for gain control. The headphone button and the talk button positions are not rememberedĬonfiguration information for surround or stereo only systems are in the back pages of this manual. After that, you should be good to go.Īlmost all user selections and gains are remembered by Avocet and restored on power up. Take the time to look at the following pages and see show how the buttons work. The remote cable must be attached and screwed down before power up. It also resets the user settings:Īll gains, main and phones are set to zero This sets up the remote for proper operation. This is done by pushing all three output select buttons at the same time. The first time that Avocet is powered up, it should be initialized. Systems that ship surround from the factory have lables on them as to how the audio boxes are configured. A specially made accessory cable connects the audio boxes when working surround. This function allows intergrating, both surround and stereo speaker systems. At the same time the main audio path can operate independently of the headphone systemīy using 3 two channel audio boxes Avocet will function as a 5.1 system, and 4 audio boxes makes a 7.1 system.
By sending a cue mix to the Aux input you can use the headphone system for doing overdubs in the studio and have communication to the artist. The talk back mic signal is mixed into the headphone amplifier along with the selected headphone source. The talkback mic (not supplied and there is no phantom power) is hooked into the xlr connector on the remote. However the level control, mono and phase buttons also apply to the program source.Īll three phone sources have individual gain settings controlled by the green knob.
#Crane song phoenix vst plus#
Options are available to change the D/A mode, all though the default mode has been chosen as more accurate.Īvocet’s many features including dim, mute, phase, mono, and 16 bit truncation functions, plus a speaker select switch that sends line level balanced audio to one of three outputs. All digital signals are up-sampled and jitter reduced to ensure highest accuracy during D/A conversion. Avocet is a stereo controller with three digital inputs, three analog inputs and a headphone system. “Avocet” is designed to solve the problems of accurate monitoring and volume control as required by workstation users, studios and mastering rooms alike. Turning the power switch off does not disconnect the unit completely from the MAINS. CAUTION: To disconnect the unit completely from the MAINS, unplug the unit. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been droppedġ3. Refer all servicing to qualified service personnel. Unplug this apparatus during lightning storms or when unused for long periods of timeġ2. Only use attachments/accessories specified by the manufacturerġ1. Protect the power cord from being walked on or pinched particularly at plugs and the point where they exit from the apparatusġ0.
#Crane song phoenix vst install#
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heatĩ. Install in accordance with the manufacturer's instructionsĨ.
0 kommentar(er)
